program at90s2313 with arduino microcontroller

Installing Arduino - Arduino isn't required to use the Programmer, but it can make things easier, especially if you still want to program your AVR using the Arduino libraries.

What is an Arduino? - If you're unfamiliar with AVRs, check out this tutorial to learn about the most popular one of the lot.Here are some tutorials we'd recommend reading before continuing on with this one:

If you've programmed an Arduino before, you'll be well-prepared for the next step. Whether you're a beginner or experienced electronics enthusiast, the Pocket Programmer should be easy to get up-and-running. We recommend using the ISP Pogo Adapter linked above now that the breakout board has been retired in the catalog. Our old simple breakout board made interfacing the programmer with your breadboarded circuit possible. Note: If your AVR is living on a breadboard, you probably don't have an interface to the standard 2x3 ISP pinout. On top of that, a mini-B USB cable is required to connect the Programmer to your computer. Most importantly, to follow along with this tutorial, you will need an AVR Pocket Programmer and an AVR to program.

Troubleshooting - A few troubleshooting tips for resolving some of the AVRDUDE errors that you may run into.

Using AVRDUDE via Command Line - A more advanced, command-line-based approach to using the AVR Pocket Programmer.

Programming via Arduino - How to use the ubiquitous 'easy-mode' AVR IDE to upload sketches via the AVR Pocket Programmer.

Installing Drivers - How to install the AVR Pocket Programmers on a Windows machine (Mac and Linux users can skip this page).

Board Overview - A look at the hardware components that make up the AVR Pocket Programmer.

It's split into a series of sections, which cover: In this tutorial we will introduce you to all of the important aspects of the AVR Pocket Programmer. Or maybe you just want a faster and more reliable code upload.

Or maybe you want to poke at the fuse bits, to change the brown-out voltage. Or maybe you want to overwrite the bootloader to squeeze out some extra flash space. If your AVR doesn't have a bootloader on it, it's probably the only way to load code. There are many reasons for programming your AVR via an in-system programmer (ISP).

Program at90s2313 with arduino microcontroller